Undead Sleds / Rat Rods Rule - Hot Rods, Rat Rods, Sleepers, Beaters & Bikes... since 2007!

Undead Sleds / Rat Rods Rule - Hot Rods, Rat Rods, Sleepers, Beaters & Bikes... since 2007! (http://ratrodsrule.com/forum/index.php)
-   Businesses, Vendors etc! (http://ratrodsrule.com/forum/forumdisplay.php?f=42)
-   -   Affordable transport (http://ratrodsrule.com/forum/showthread.php?t=27276)

21willys 01-07-2013 12:44 PM

Affordable transport
 
Im now offering open trailer hauling. I am fully insured and have 14 years of hauling experience with all kinds of loads. I can haul parts or whole cars. My trailer is a 7k gvw tilt deck with a 18' tilt and 4' stationary. For a estimate or for questions you can pm me or give me a call.

Eric Bair
1-765-506-1544

Torch 01-07-2013 12:53 PM

Check out "Central Dispatch" for cars to haul...good resource to keep you busy or pick up little odds and ends along a long haul

21willys 01-07-2013 02:47 PM

I looked at that this morning. It appeared that you have to become a member to even look at the loads. I will have to check it out better this evening.

Thanks

Old Iron 01-07-2013 06:24 PM

someone posted wanting a f100 or ? hauled on here yesterday ?

Dirtyrat 01-07-2013 07:40 PM

Any trips from AZ to MI planned ? =) =)

21willys 01-07-2013 11:15 PM

Thanks
 
Quote:

Originally Posted by Old Iron (Post 327056)
someone posted wanting a f100 or ? hauled on here yesterday ?

I sent him a message.

Thanks

21willys 01-07-2013 11:17 PM

Quote:

Originally Posted by Dirtyrat (Post 327065)
Any trips from AZ to MI planned ? =) =)

I can find a load heading that way and bring yours back. What are you needing hauled?

Thanks

Dirtyrat 01-08-2013 09:00 AM

I have a tank out there I need brought back, I am going to be paying for it in the next week, and starting to quote out freight... Its will be slightly oversize on the pallet size (normal is 48x48, but I'll be a bit longer in one direction), probably 250#.

21willys 01-08-2013 09:24 PM

Once you have a date that it can be picked up let me know and I can see what I can offer.

Thanks

Torch 01-14-2013 04:21 AM

Quote:

Originally Posted by 21willys (Post 327027)
I looked at that this morning. It appeared that you have to become a member to even look at the loads. I will have to check it out better this evening.

Thanks

I have gotten on there and signed up for a trial to see what it was.
I got referred to it when I was considering adding car hauling to my trucking business I used to have.
But you do have to have a DOT number and commercial authority to haul for money.
I don't think it's required for membership in the load board but it is required to contract loads.
Without the papers, insurance will not cover you if in an accident hauling commercial illegally; the law will not enforce your contract; you will be fined and I have been present in the port of entries in several states where there was an amateur hauler who did not know the authority and the permits he needed and they impounded their rigs.
They would not let them leave the scale-house with their trailers until they either hired a licensed carrier to transport it across the state or came back with the right papers.
If you don't get the authority and the permits it's considered a form of tax evasion.
They have been cracking down on shady brokers and trucking outfits the last few years.
They recently raised the broker's liability bond from 10k to 100k.
If you do not have carrier authority you have to lease on under someone who does and contract through them under their name.


All times are GMT -5. The time now is 12:56 PM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Rat Rods Rule Inc.