Aluminum Various sizes and shapes

Rat Rods Rule

Help Support Rat Rods Rule:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

goose-em

Well-known member
Joined
Apr 18, 2008
Messages
612
Location
Northshore, Lake Pontchatrain
I have a bunch of aluminum in various shapes that I need to get rid of.

Shapes range from flat plate, square tube, round tube, angle, I-beam, flat bar, etc.

I probably have around 5k to 10k pounds of this stuff so odds are I will have what you need.

Thicknesess range from thin to about 1/4 inch, by thin I mean .062 maybe some that is thinner.

Lengths are around 20 feet each but some have damage on the ends.

I can cut this up into shorter lengths, ship whatever you need.

Alloy is 6061 T6, may have some 5083 or 5086 plate out there also.

Cost is $1.10 per pound plus shipping charges. If you are close to me you can pick it up or I can deliver within 20 miles of Mandeville as long as the amount you want will pay for my trip.

If you are interested let me know what you are looking for and I will let you know if I have it.

I will weigh it and give you a price, plus shipping to your location.

Again that is $1.10 per pound no matter what you want plus shipping.
 
I would like 6 pieces 5"x5" 1/2" thick. If this is too small of an order let me know. I am trying to fab my own wheel centers. Thanks.
 
I am looking for 2 pieces that are 1 3/4" x 4 1/2"

I need 2 of them
1 piece that is 1" thick and 1 piece that is 2" thick if that is cool with you
 
Picture of the aluminum

Hope this helps. This is what I have left.
 

Attachments

  • scrap_photo.JPG
    scrap_photo.JPG
    73.3 KB · Views: 27

Latest posts

Back
Top