Custom Mopar ????

Rat Rods Rule

Help Support Rat Rods Rule:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Tahnks Gang.
No worries on the Dodge.
I need more sheet metal. Also at the point where I need to be IN the car.
Getting in would be.......ok.:)
Getting out again could be.........Interesting.:p
Torchie
 
Cleaned all the parts out of the Dodge.
I removed the center section of flooring and trimmed it down.
Put the center section back in and threw in the seat frame to get it out of the way.
This was yesterday.
Today I woke up to a very swollen right hand........Again.:eek:
I grow weary of all this nonsense.:(
Torchie
 

Attachments

  • IMG_5024.jpg
    IMG_5024.jpg
    96 KB · Views: 19
  • IMG_5025.jpg
    IMG_5025.jpg
    116.3 KB · Views: 17
  • IMG_5026.jpg
    IMG_5026.jpg
    105.6 KB · Views: 17
  • IMG_5028.jpg
    IMG_5028.jpg
    89 KB · Views: 17
  • IMG_5034.jpg
    IMG_5034.jpg
    119.8 KB · Views: 18
  • IMG_5022.jpg
    IMG_5022.jpg
    121.4 KB · Views: 20
Thanks gang.
OI. My right elbow/ arm and hand were the reason for the last hospital visit. They were do swollen that I could not move them.( Maybe i didn't mention the last hospital stay. 😂
I can’t keep track anymore.
It seems the male family curse showed up. Gout. How can i have gout when i am hardly eating anything. Must be all the beer.🤪
Torchie
 
No pictures.
I tied down the springs on the Dodges front seat bottom to make it thinner.
Put it kn the seat frame but it is still too thick.

Out with the springs and in with the hi density foam when the time comes.
Torchie
 
Pulled out the steering wheel and the dash today.
Drilled the holes to mount the firewall brake pedal.
I need to get a bigger hole saw for metal to drill the center hole.
Not much but it's some progress.:eek::cool:
Torchie
 

Attachments

  • IMG_5111.jpg
    IMG_5111.jpg
    74.1 KB · Views: 19
  • IMG_5117.jpg
    IMG_5117.jpg
    119.6 KB · Views: 20
  • IMG_5116.jpg
    IMG_5116.jpg
    66.2 KB · Views: 21
  • IMG_5112.jpg
    IMG_5112.jpg
    80.6 KB · Views: 19
  • IMG_5108.jpg
    IMG_5108.jpg
    122.4 KB · Views: 18
  • IMG_5107.jpg
    IMG_5107.jpg
    125.9 KB · Views: 20
  • IMG_5106.jpg
    IMG_5106.jpg
    118.4 KB · Views: 21
2 for 1 day today.
After messing with the cCaddy hood we turned towards the Mopars.
Went to work on stripping out the donor Dodge.
Quick and dirty.:eek::cool:
I will continue to pull some odds and ends before it get removed.
We then drilled the MC hole in the fire wall on the Dodge Custom.
I also did a quick sipher on how much more sheet metal I will need for the floor.
Of course half a sheet is not enough and a full sheet will leave me with left overs.(As if there is such a thing as left over steel.:p)
Pics tell the story.
Torchie
 

Attachments

  • IMG_5195.jpg
    IMG_5195.jpg
    152.7 KB · Views: 19
  • IMG_5196.jpg
    IMG_5196.jpg
    183.5 KB · Views: 20
  • IMG_5197.jpg
    IMG_5197.jpg
    202.2 KB · Views: 19
  • IMG_5198.jpg
    IMG_5198.jpg
    152 KB · Views: 20
  • IMG_5200.jpg
    IMG_5200.jpg
    110.9 KB · Views: 21
  • IMG_5201.jpg
    IMG_5201.jpg
    140.3 KB · Views: 20
It seems no one wants to haul the donor Dodge to scrap.
Plan B is that Jon and I will cut it up into pieces and haul it there ourselves. Oy......
Like I haven’t enough to do already.
Keep on keeping on.....
Torchie
 

Latest posts

Back
Top