Model A Pickup just another build !

Rat Rods Rule

Help Support Rat Rods Rule:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

dmw56

Busted and Rusted on Route 66
Joined
Dec 21, 2007
Messages
6,471
Location
Edgewood, New Mexico off Route 66
Gonna start another build. I got a cab and a frame let's get started! Well I've had both the frame and cab for about 12-13 years so I guess I started years ago.
I got the cab in Texas and the frame with some others with titles in Kansas.
 

Attachments

  • IMG_20230602_084426349_HDR.jpg
    IMG_20230602_084426349_HDR.jpg
    145.5 KB · Views: 34
  • IMG_20230602_084435998_HDR.jpg
    IMG_20230602_084435998_HDR.jpg
    140.2 KB · Views: 26
  • IMG_20230602_084119941_HDR.jpg
    IMG_20230602_084119941_HDR.jpg
    219.3 KB · Views: 35
I have most everything for the front end. The axle and spindles are 37-41 Ford. Split 46 wish bones with tie rod ends.The brake backing plates are Ford F2 truck with 12" Bendix brakes. The drums are 12" Buick Aluminum drums. F1 shock mounts.
 

Attachments

  • IMG_20230602_074722666.jpg
    IMG_20230602_074722666.jpg
    122.7 KB · Views: 22
  • IMG_20230521_140251339.jpg
    IMG_20230521_140251339.jpg
    115.6 KB · Views: 20
  • IMG_20230518_160341109.jpg
    IMG_20230518_160341109.jpg
    140.7 KB · Views: 17
  • IMG_20230519_132255539.jpg
    IMG_20230519_132255539.jpg
    100.9 KB · Views: 21
I have several grilles to choose from. I'll probably use the smaller 29 Model A one. Gas tanks a bomber O² tank kinda small, but Kool and Model T tank.
 

Attachments

  • IMG_20230602_084607738.jpg
    IMG_20230602_084607738.jpg
    64.3 KB · Views: 16
  • IMG_20230602_084722908_HDR.jpg
    IMG_20230602_084722908_HDR.jpg
    158.4 KB · Views: 17
  • IMG_20230602_084638083.jpg
    IMG_20230602_084638083.jpg
    73.4 KB · Views: 16
I have 2 sets of headlights. I like the ones with the turn signals.
I also have a reversed Corvair steering box and a 34 Ford box and column. If I were going traditional I'd use the 34 box. We'll see. The 34 box practically bolts right in! 👍😎
 

Attachments

  • IMG_20230602_084629663.jpg
    IMG_20230602_084629663.jpg
    64.6 KB · Views: 14
  • IMG_20230602_084534137.jpg
    IMG_20230602_084534137.jpg
    79.8 KB · Views: 18
  • IMG_20230601_132523316_HDR.jpg
    IMG_20230601_132523316_HDR.jpg
    79 KB · Views: 19
I have the bed, tailgate, and some assorted stuff, no fenders, splash aprons or big heavy stuff we don't need!
Oh but I have a rear quarter from a 59 Catalina. Hmmmm bed maybe! 😉
 

Attachments

  • IMG_20230602_084304637.jpg
    IMG_20230602_084304637.jpg
    127.9 KB · Views: 21
  • IMG_20230602_123623510_HDR.jpg
    IMG_20230602_123623510_HDR.jpg
    201.6 KB · Views: 26
  • IMG_20230602_084245527_HDR.jpg
    IMG_20230602_084245527_HDR.jpg
    218.8 KB · Views: 20
10 bolt rear with brackets for hairpins, coilovers and panhard bar already welded on.
Mustang radiator. I also have a third row minivan seat.

Now I just have to put this all together.
 

Attachments

  • IMG_20230601_135108476.jpg
    IMG_20230601_135108476.jpg
    82.2 KB · Views: 22
  • IMG_20230602_084617481.jpg
    IMG_20230602_084617481.jpg
    62.8 KB · Views: 17
And I have this killer blown engine to cram between the frame rails! 😎👍
 

Attachments

  • IMG_20230511_104935875_HDR.jpg
    IMG_20230511_104935875_HDR.jpg
    186 KB · Views: 38
  • IMG_20230511_104942391_HDR.jpg
    IMG_20230511_104942391_HDR.jpg
    146.2 KB · Views: 26
Clean up the frame and painted it with rust converter.
I measured it for square it was right on! Really flexible with no cross members though! That will be fixed. I will go with a small kickup on the rear for a coil spring set up.
 

Attachments

  • IMG_20230607_123238741_HDR.jpg
    IMG_20230607_123238741_HDR.jpg
    145.5 KB · Views: 13
  • IMG_20230607_120216887_HDR.jpg
    IMG_20230607_120216887_HDR.jpg
    147.7 KB · Views: 12
Finished one side of the brakes. 12"x2" drums. Then I couldn't find the lower spring by the adjuster. I really can't remember if I had it at all. So I look in my collection of brake springs and of course I don't I have one.
I have couple local resources I'll have to check for one.
 

Attachments

  • IMG_20230606_120728608_HDR.jpg
    IMG_20230606_120728608_HDR.jpg
    102.2 KB · Views: 12
  • IMG_20230606_120735745.jpg
    IMG_20230606_120735745.jpg
    113.3 KB · Views: 13
  • IMG_20230607_144057299.jpg
    IMG_20230607_144057299.jpg
    128.2 KB · Views: 13
  • IMG_20230606_121949147.jpg
    IMG_20230606_121949147.jpg
    175 KB · Views: 12
As far as engines go, I have several choices.
2 AMC 360s, a 010 block SBC and a vortex SBC, and a Pontiac 389.
 

Attachments

  • IMG_20230606_113746777.jpg
    IMG_20230606_113746777.jpg
    116.3 KB · Views: 17
  • IMG_20230606_111014260_HDR.jpg
    IMG_20230606_111014260_HDR.jpg
    133.5 KB · Views: 16

Latest posts

Back
Top