My missguided metal work (the side work)

[GJunktionMike]

Well my youngest brother asked if I could fix and shave his doors to his 50's studie pickup. This brings a new meaning to shaving doors, he doesn't want windows or the trim or the channel for the window.

[Bonehead]

Looks good. cleaned up real nice.

[GJunktionMike]

Originally Posted by Bonehead

Looks good. cleaned up real nice.

Thank BH it was alot of tacking and hammering.

I always foreget before pics. Door was cratered in 1" next to the jam. Had to hammer the rounded peices for the bottom of the door.

[GJunktionMike]

A trim saw and 80 tooth blade works wonders

[GJunktionMike]

I know what your thinking, I need a bigger motor Just fun'n. Well I'm done with the old tire under the motor so I built me a stand.

[Old Iron]

Mike the engine on the wagon may work if you use this tranny

[GJunktionMike]

Dont tempt me

[gold03]

I thought the V-Drive from a boat would make a cool project with the engine in the rear, and backwards. Sure make people stand and scratch their heads trying to figure it out.

gold03

[GJunktionMike]

I have seen the V-drive done before. At our local 1/4" strip years ago a local here had a chevy van and could run the 1/4 in a wheel stand. I have also seen a few in hot rod mags.

[Gastrick]

Nice work Mike. I like to watch this type of thing going on.