1959 Pontiac Catalina Safari

Rat Rods Rule

Help Support Rat Rods Rule:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
The driver side was sagging a little lower than the other side. The spring was a little shorter. So I evened them up with a slight lowering. šŸ˜Ž
Half a coil probably won't see a difference. But it is even now.
 

Attachments

  • IMG_20220411_120327906.jpg
    IMG_20220411_120327906.jpg
    132.8 KB · Views: 9
The driver side was sagging a little lower than the other side. The spring was a little shorter. So I evened them up with a slight lowering. šŸ˜Ž
Half a coil probably won't see a difference. But it is even now.

I have new front springs waiting to go into my '62 Bel Air for this exact reason. The problem is I cut the springs already (18 years ago) and it's real low, so I can't cut them more to even them out. Going from the 6 cylinder springs to the small block springs too.
 
Finished up the throttle using GM parts. Had to shorten it, move it to the other side and change the angle.
Decided since the engine is really easy to get to right now I'd change the water pump. It was only $50 from NAPA. I have no history on the old one.
 

Attachments

  • IMG_20220415_122731992.jpg
    IMG_20220415_122731992.jpg
    140.1 KB · Views: 15
  • IMG_20220415_122943085.jpg
    IMG_20220415_122943085.jpg
    107.4 KB · Views: 14
  • IMG_20220415_133725272.jpg
    IMG_20220415_133725272.jpg
    124.4 KB · Views: 15
  • IMG_20220414_110145641.jpg
    IMG_20220414_110145641.jpg
    97.5 KB · Views: 13
Sorry I haven't updated this for awhile.
Got the engine in and everything connected. Fits like it was made for it.
Shortened the drive shaft and used a TH400 yoke and u-joint with 2 different sides.
 

Attachments

  • IMG_20230225_144524079.jpg
    IMG_20230225_144524079.jpg
    114.6 KB · Views: 26
  • IMG_20230112_132454032_HDR.jpg
    IMG_20230112_132454032_HDR.jpg
    130.7 KB · Views: 24
  • IMG_20221228_110233860.jpg
    IMG_20221228_110233860.jpg
    100.9 KB · Views: 23
Cleaning up the inside.
 

Attachments

  • IMG_20221221_123641961.jpg
    IMG_20221221_123641961.jpg
    79.7 KB · Views: 19
  • IMG_20230101_124021513.jpg
    IMG_20230101_124021513.jpg
    68.6 KB · Views: 17
  • IMG_20230101_124237650.jpg
    IMG_20230101_124237650.jpg
    95.4 KB · Views: 20
  • IMG_20221221_123511264.jpg
    IMG_20221221_123511264.jpg
    54.2 KB · Views: 20
Cleaning up what's left of the paint on the outside!
 

Attachments

  • IMG_20230228_130211585.jpg
    IMG_20230228_130211585.jpg
    132.1 KB · Views: 24
  • IMG_20230226_150715998.jpg
    IMG_20230226_150715998.jpg
    62.6 KB · Views: 23
  • IMG_20230228_130115494.jpg
    IMG_20230228_130115494.jpg
    109.7 KB · Views: 22
  • IMG_20230228_125954984.jpg
    IMG_20230228_125954984.jpg
    90.3 KB · Views: 22
  • IMG_20230227_130228756.jpg
    IMG_20230227_130228756.jpg
    97.7 KB · Views: 20

Latest posts

Back
Top