Custom Mopar ????

Rat Rods Rule

Help Support Rat Rods Rule:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Hey...
We are back.[cl :D :cool:
Ventured out to the shop for the first time in a while yesterday.
Worked on rounding the lower corners and folding over the lower lip.
Did a little trimming on the inner frame first. Once I got the lower lip folded over I trimmed it to match the width of the stock overlap.
I'm happy with how the radius on the tail light bucket matches the round lower corners.:)
All this took about 2 hours which seems to be about my time limit right now.
Keep on keeping on.
Torchie
 

Attachments

  • 2-6.jpg
    2-6.jpg
    56.8 KB · Views: 27
  • 2-7.jpg
    2-7.jpg
    36.2 KB · Views: 27
  • 2-8.jpg
    2-8.jpg
    64.8 KB · Views: 29
  • 2-9.jpg
    2-9.jpg
    44 KB · Views: 26
  • 2-11.jpg
    2-11.jpg
    44.5 KB · Views: 22
  • 2-12.jpg
    2-12.jpg
    60.1 KB · Views: 23
  • 2-5.jpg
    2-5.jpg
    58.6 KB · Views: 27
  • 2-13.jpg
    2-13.jpg
    44 KB · Views: 27
I missed you leaving and missed you coming back. you could just say I missed you and leave it at that. :p glad you are still shuffling around torch!


I dont have the patience for any of this work but I sure appreciate that you do!
 
Amazing how the little things change the overall look. [cl[cl:cool::cool:[P[P

Indeed POPS.
Some of it is things that no one will notice. Others are fairly obvious.
If this was a points car it would be considered a “ Radical” custom. Due to the chop and sectioning.
Doesn’t look too radical to me.
Torchie
 
It's looking really nice!! I agree the little things makes all run smoothly and only you really know how much work went into a 4" piece of metal [;)
Rest easy, you'll be back the 8 hour days soon. [P
 
Thanks gang.:)
Fender bolted on and started to fully weld it yesterday.
This is going to take a while.[;) [;) [;)
Filler rod where needed to bridge the gaps.
Ugly but strong and I pity the fool that has to ever take this fender off.(Lets hope it's not me.:eek: [ddd .)
No progress today. Looking at getting back to it tomorrow as the temps are supposed to be in the mid 40's here.
Keep on keeping on......
Torchie
 

Attachments

  • 2.jpg
    2.jpg
    38.4 KB · Views: 17
  • 2-1.jpg
    2-1.jpg
    63.4 KB · Views: 17
  • 2-4.jpg
    2-4.jpg
    41.7 KB · Views: 17
  • 2-14.jpg
    2-14.jpg
    29.4 KB · Views: 18
Thanks all.:)
3 hours welding and 2 grinding discs later.[;) [;) [;)
I'm calling it welded.
Might blow some heat in to the shop tomorrow and do a little plastic surgery over all the scars.:eek::D:cool:
Not the greatest pics but I'm exhausted.:eek:
Keep on keeping on....
Torchie
 

Attachments

  • 2.jpg
    2.jpg
    30.6 KB · Views: 21
  • 2-1.jpg
    2-1.jpg
    51.1 KB · Views: 22
NICE!!! I thought you were going to take it easy for a while.
You want to come help me? The pay isn't much but it is warmer here.

I am taking it easy POPS.[ddd
If I take it too easy I'll just spend what time I have left sitting in a chair.
Pay isn't much here either. But the woman and the food are great.:eek: [cl :D [ddd
Torchie
 
Heated up the shop and spread a thin coat of Fiberglass reinforced filler over the scars.
My compressor is unhooked so I grabbed a variable speed 8 inch sander and gave it all a quick once over with 80 grit.
Dig the subtle flare around the tail light buckets. Most people will never even notice that.:eek::D
Next week will be hit and miss as the work on my new leg and both braces start on Tuesday. Along with more follow ups at the Drs.
On to the other side.[;) [;) [;)
Keep on keeping on......
Torchie
p.s. Now it's chair time.:eek: :p [ddd
 

Attachments

  • 2-1.jpg
    2-1.jpg
    62.2 KB · Views: 16
  • 2-8.jpg
    2-8.jpg
    59.6 KB · Views: 14
  • 2-4.jpg
    2-4.jpg
    34.2 KB · Views: 14
  • 2-5.jpg
    2-5.jpg
    37.3 KB · Views: 13
  • 2-6.jpg
    2-6.jpg
    30.5 KB · Views: 13
  • 2-7.jpg
    2-7.jpg
    47.2 KB · Views: 13
  • 2-9.jpg
    2-9.jpg
    30.4 KB · Views: 15
  • 2-11.jpg
    2-11.jpg
    44.1 KB · Views: 16
  • 2-14.jpg
    2-14.jpg
    66.6 KB · Views: 16
  • 2-15.jpg
    2-15.jpg
    57.5 KB · Views: 14

Latest posts

Back
Top