Undead Sleds / Rat Rods Rule - Hot Rods, Rat Rods, Sleepers, Beaters & Bikes... since 2007!

Go Back   Undead Sleds / Rat Rods Rule - Hot Rods, Rat Rods, Sleepers, Beaters & Bikes... since 2007! > Need help identifying an item! What the heck is it?!?

Need help identifying an item! What the heck is it?!? Need help identifying a part, car or what ever... post it here!!!

Reply
 
Thread Tools Display Modes
  #1  
Old 04-04-2020, 10:05 PM
Mykk Mykk is offline
Member
 
Join Date: Aug 2018
Location: Prescott Az
Posts: 76
Default Need help finding pitman arm.

Hey guys, I need some help identifying the correct pitman arm.

I'm using a mid 70's F250 manual steering gear (reversed) for the cowl steering in my project:





Of course, a pitman arm for a mid 70's (or any year) F250 (or any other ford model) doesn't fit this box, most of the pitman arms are too big of a hole/spline.

The output shaft is 1.11" on the big end of the taper and 1.050" on the small outboard end of the tapper. It has three masters on the steering gear side of the spline. I'm not to concerned about the masters as I'm sure I'll need to grind them to clock the pitman where I need it anyways.

Parts listings say this gearbox is a 28 spline. The closest I can find by size is a 32 spline, 4 master with a 1.020" hole pitman for a GM 525/605 box. I can not find in parts store or online a pitman arm by size listing catalog. This afternoon I took the box into my local napa and pulled every pitman arm they had in stock on the shelf and not a single one fit.

Does anyone have any insight on what pitman arm to get for this box? Here I thought using a mid 70's ford steering gear would be easy to find parts :-P

More pics of the steering gear coming out the side of the body:







Thank you for an advice and input
Reply With Quote
  #2  
Old 04-04-2020, 11:42 PM
Old Iron's Avatar
Old Iron Old Iron is offline
Rusty Rat Rodder
 
Join Date: May 2011
Location: Willard Mo.
Posts: 12,175
Default

That'll be a salvage yard item
Reply With Quote
  #3  
Old 04-05-2020, 11:11 AM
26Troadster's Avatar
26Troadster 26Troadster is offline
Rusty Rat Rodder
 
Join Date: May 2007
Posts: 3,658
Default

sorry no help, but cool looking ride. a lot of folks don't like cowl steering because of bump steer. hope you find the parts you need.
Reply With Quote
  #4  
Old 04-14-2020, 10:37 AM
donsrods's Avatar
donsrods donsrods is offline
Rusty Rat Rodder
 
Join Date: May 2007
Location: fort myers florida
Posts: 10,178
Default

A) I love your hot rod, and B) I do not think you will find an off the rack steering arm to do what you want it to do.

What I would do is, find a stock steering arm for that box that fits it, cut it up, weld the spined section to a round adapter plate, and then, once you bolt that on you can make up a second adapter plate to bolt to the first one, and extend that outboard to put an arm that you fabricate on the end.

Hope that is clear. It is rare to find stock arms that do all you need them to do, sometimes you have to improvise and make your own.
Reply With Quote
  #5  
Old 04-17-2020, 05:28 PM
Sniper1 Sniper1 is offline
Member
 
Join Date: Sep 2019
Location: San Angelo, Texas
Posts: 36
Default

Near as I can figure, the manual box uses a different pitman arm than the power box and the manual pitman isn't available new. I found a listing on Ebay that might be it, seller say's he's will to answer questions.

ebay pitman arm

No it isn't me selling it.
Reply With Quote
  #6  
Old 04-21-2020, 08:51 AM
HOT40ROD's Avatar
HOT40ROD HOT40ROD is offline
Rusty Rat Rodder
 
Join Date: Dec 2007
Location: eastern Pa.
Posts: 1,243
Default

Check Early Mustang they had two sizes the one is 32 spline with a 1 1/8 hole. There are a lot of aftermarket applications for the mustang box pitman arm. Count the spline on your box
__________________
Ideas not coupled with action never become bigger than the brain cells they occupied.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 04:39 AM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Rat Rods Rule Inc.