My '64 Rambler wagon build!

[ruggs]

Tripper, if you need some heat for your garage check out the Diesel parking heaters. A 8 KW is equal to 27,000 BTU. cheap and vented to the outside. Since the patent has run out they got very cheap. And safe used by truckers and RVs

[Bamamav]

Originally Posted by ruggs

Tripper, if you need some heat for your garage check out the Diesel parking heaters. A 8 KW is equal to 27,000 BTU. cheap and vented to the outside. Since the patent has run out they got very cheap. And safe used by truckers and RVs

I can attest to that. Last truck I had it had one in it, I couldn’t run it long at a time, it’d run you out on low! Would be simple to run one on a 12 volt converter for the fan and fuel pump.

[Tripper]

It was really hump day for me today! I actually felt I had gotten over the hump on this build & could see myself driving it around in the near future! Had a few lil setbacks but seein' the light at the end of the tunnel!

BoB

[Couper]

Excellent Bob!

[Tripper]

I was all ready to stick the engine/trans back it this week but when I went to bleed the master, I noticed the slug between the booster & master was missing so I'm stuck waiting on one stupid lil part... supposed to be arriving tomorrow! Fingers crossed! In the meantime... I'm sorting out the wiring loom & mapping out how I will proceed! I dreamed last night I was driving it!

BoB

[Old Iron]

I've waited more on parts this year than I ever have.
t's a good thing we're more patient now that we're older than we were when we were young

[Tripper]

Originally Posted by Old Iron

I've waited more on parts this year than I ever have.
t's a good thing we're more patient now that we're older than we were when we were young

I know that's right!!! 😎

BoB

[Bamamav]

Originally Posted by Tripper

I was all ready to stick the engine/trans back it this week but when I went to bleed the master, I noticed the slug between the booster & master was missing so I'm stuck waiting on one stupid lil part... supposed to be arriving tomorrow! Fingers crossed! In the meantime... I'm sorting out the wiring loom & mapping out how I will proceed! I dreamed last night I was driving it!

BoB

Don't tell me, Speedway, right? My first one didn't have one either, took me a while to figure it out. I made one out of an old Chinese socket and a little weld in the hole. Worked fine. The new master I put on last year, it was in the box, so I used it.

[Tripper]

Originally Posted by Bamamav

Don't tell me, Speedway, right? My first one didn't have one either, took me a while to figure it out. I made one out of an old Chinese socket and a little weld in the hole. Worked fine. The new master I put on last year, it was in the box, so I used it.

Actually Jegs & try getting them on the phone!

BoB

[Bamamav]

Yeah, since Jegs got bought out, I think service has went downhill.