Radiator for my 331 Hemi

Rat Rods Rule

Help Support Rat Rods Rule:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

broderchamp

New member
Joined
Sep 9, 2013
Messages
4
Any ideas about a good source for a radiator for my Model A roadster running a 331 hemi? I have channeled the body over the frame so I run a straight edge from the cowl to where I think I should mount the 32 shell and it really cuts down on the size of the radiator. I have a Model A radiator but the bottom outlet is on the wrong side and I have to have it cut down and recored
 
Have a custom one made. Those hemis are hot runners anyway and require a big radiator and lots of fan. I am running a chopped 32 shell too (chopped 8.5 inches) and I had a radiator built by The Brassworks years ago. It was $700 even 26 years ago, but it is still on the car and keeping my 331 Ford at 170-180 even in traffic,

I also like SPAL fans, and use the biggest one I can get on the radiator. If you cheap out on the cooling system you will hate driving your car in the Summer.

Don
 

Latest posts

Back
Top