Aluminum Various sizes and shapes

[goose-em]

I have a bunch of aluminum in various shapes that I need to get rid of.

Shapes range from flat plate, square tube, round tube, angle, I-beam, flat bar, etc.

I probably have around 5k to 10k pounds of this stuff so odds are I will have what you need.

Thicknesess range from thin to about 1/4 inch, by thin I mean .062 maybe some that is thinner.

Lengths are around 20 feet each but some have damage on the ends.

I can cut this up into shorter lengths, ship whatever you need.

Alloy is 6061 T6, may have some 5083 or 5086 plate out there also.

Cost is $1.10 per pound plus shipping charges. If you are close to me you can pick it up or I can deliver within 20 miles of Mandeville as long as the amount you want will pay for my trip.

If you are interested let me know what you are looking for and I will let you know if I have it.

I will weigh it and give you a price, plus shipping to your location.

Again that is $1.10 per pound no matter what you want plus shipping.

[oldskool]

What size of tubing? looking for 1"o.d..what is the thinkness on some plate?

[old man dave]

I would like 6 pieces 5"x5" 1/2" thick. If this is too small of an order let me know. I am trying to fab my own wheel centers. Thanks.

[LUCKY DEVIL 13]

I am looking for 2 pieces that are 1 3/4" x 4 1/2"

I need 2 of them
1 piece that is 1" thick and 1 piece that is 2" thick if that is cool with you

[goose-em]

I will look to see what size tubing is out there. Various plates thicknesses, let me know what you need.

Sent PM's

[deerchooper]

im looking for either 3/4" or 1" plate 14"x14"

let me know please

terry

[Flipper_1938]

Can you post some sample pics of what you've got?

[goose-em]

I can as soon as I take some. Try to get them up tomorrow.

[goose-em]

Hope this helps. This is what I have left.