Another hair pin question

Rat Rods Rule

Help Support Rat Rods Rule:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

kgrabber

Member
Joined
May 5, 2015
Messages
12
Location
Central Kansas
I'm working on a 29 chevy. I've removed the parallel leafs up front and I want to build hair pins. the problem is that i would like to keep the steering box in the stock location however to do this the radius rods need to be 24" or less. Is this to short for average articulation?
 
I'm working on a 29 chevy. I've removed the parallel leafs up front and I want to build hair pins. the problem is that i would like to keep the steering box in the stock location however to do this the radius rods need to be 24" or less. Is this to short for average articulation?

Probably be OK, we build all of our front radius rods 27" but we custom build a lot of other lengths also. The shortest one so far were 15" long, for a customer, and we have done quite a few at 24".
 

Latest posts

Back
Top