Elegant decay aka the "Ratty Caddy."

Rat Rods Rule

Help Support Rat Rods Rule:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
That's a lot of trim parts Torchie! Good thing they are all there.

I scuffed up my truck with a green scotch brite pad and CLR, then applied the Sweet Patina. Wasn't any more difficult than washing and waxing a shiney car, but WAY more rewarding. I very surprised at how it treated both the surface rust and the remaining paint. Darkened it way down and I loved the look. The only problem I had was the smell - kinda smelled like BBQ sauce so it was making me hungry!
 
Thanks for the Patina sauce info, Bill.
Good thing there are all the trim parts there as they are $$$$$$
The most important part I found was something that many would have tossed out for scrap.:eek:
It's those 2 rusty pieces of sheet metal you see in the pictures.
Pic.1. The original color on the Cadillac is the "French Gray" you see at the top of the chart. Kind of boring. I like the way it looks now, much better.:eek::eek: :D :cool: :cool:
Pic.2. You can see the remnants of the extension on what's left of the original rocker. These are not made anymore.
Pic.3-4. What you are looking at is a set of Rocker extensions that fit against the rocker and under the rear door.
This fills in the gap where the bulge on the rear door overhangs the outside of the rocker.
Pics 5-6. Pics tell the rest of the story.
I looked at half a dozen sets of new skins and not one of them have these on them.
And I question wether any of them would even come close to fitting. I will start out using the replacement skins that were so poorly fitted on the car when I got it.
And see how it goes from there.[;) [;) [;)
Keep on keeping on....
Torchie.
 

Attachments

  • IMG_4461.jpg
    IMG_4461.jpg
    153.2 KB · Views: 21
  • IMG_4450.jpg
    IMG_4450.jpg
    93.4 KB · Views: 20
  • IMG_4452.jpg
    IMG_4452.jpg
    106.5 KB · Views: 20
  • IMG_4476.jpg
    IMG_4476.jpg
    137.4 KB · Views: 21
  • IMG_4478.jpg
    IMG_4478.jpg
    205.7 KB · Views: 24
  • IMG_4467.jpg
    IMG_4467.jpg
    117.5 KB · Views: 20
Glad to see your keeping on [cl
Progress is good [;)

Thanks soltz.:)
More keeping on.
We got the shop presentable then moved the custom across the back of the shop.
We managed to get the Ratty one in too.:eek: :cool:
Am I a weak, materialistic, shallow person because this makes me smile?.......NAW! Just a car nut.:p :D :cool: :cool:
I know it looks cramped but I have full, non trip, access to 3 sides of the Dodge. Same as before. I will be picking up the welding in the trunk area once I get started.
I also have full 3 sided access to the Cadillac.
Once I start on that It will be the DS rocker, which is facing out.[cl[;) [;)
It would be great to have another set of wheel dollies but I can think of 100 ways to better spend that money.
My brother tired to put the hood hinges on. These were designed to come off/on from the bottom with the car on a hoist. We are still imagineering on that.:eek:
Tomorrow we are heading to the Daughters for Mothers day. Most likely sometime this coming week before I get to it in earnest.[cl[cl
Keep on keeping on......
Torchie
 

Attachments

  • IMG_4555.jpg
    IMG_4555.jpg
    184.9 KB · Views: 23
  • IMG_4566.jpg
    IMG_4566.jpg
    121 KB · Views: 24
  • IMG_4563.jpg
    IMG_4563.jpg
    109.2 KB · Views: 22
  • IMG_4557.jpg
    IMG_4557.jpg
    96.9 KB · Views: 23
  • IMG_4556.jpg
    IMG_4556.jpg
    97.9 KB · Views: 25
  • IMG_4550.jpg
    IMG_4550.jpg
    115.1 KB · Views: 23
  • IMG_4577.jpg
    IMG_4577.jpg
    133.6 KB · Views: 23
  • IMG_4576.jpg
    IMG_4576.jpg
    121.8 KB · Views: 24
Some times you just have to stop and clean up so you can make another mess!
Looking good. I'm about 3 or 4 months past the point of needing to clean up. But it's on the list.[S[S

You are an inspiration to me Torchie..Carry on [P:cool::cool:[cl
 
Thanks POPS and Bill.
Its amazing how fast the shop can get cluttered up, POPS.
I agree withe the energy that a new project brings, Bill.
The Cadillac brings that and so much more.
Did I need it. No.
Is that money better spent on the Dodge. You bet.
The Caddy , to me, is more like a big middle finger to all those that told me i should have just given up last winter.
Not only am i not giving up. I’m taking on more.
I guess thats just the kind of person i am.:eek: [ddd :p
Torchie
 
Thanks gang.
It was a lot rougher of a winter then I let on dutch.
Mostly people that didn't like seeing me suffer. I think it was well meant but misguided. Lol
People don't always know what to say to people that are ill. And what they do say doesn't always come out right.
I get it, but thats just not my nature.
Anyway. I am still here.😎
Low Budget. You and I are of the same mindset.
I just fell hard for this car from the first time i saw a picture. And as you all know its just like me to drag home something most wouldn't give a second thought to.
My thought was that i could part it out and make some money. Now that i have a new, clear, clean , current Michigan title for her its full steam ahead.:cool: [;)[;)
Stay tuned car fans........
Torchie
 
Cooler here today so I did some more clean out on the Cadillac.
Found some stuff. Mostly rust holes.:eek::D [;)[;)
Keep on keeping on......
Torchie.
 

Attachments

  • IMG_4647.jpg
    IMG_4647.jpg
    112.5 KB · Views: 20
  • IMG_4663.jpg
    IMG_4663.jpg
    118.5 KB · Views: 19
  • IMG_4662.jpg
    IMG_4662.jpg
    127.1 KB · Views: 22
  • IMG_4660.jpg
    IMG_4660.jpg
    142.2 KB · Views: 19
  • IMG_4656.jpg
    IMG_4656.jpg
    137.7 KB · Views: 19
  • IMG_4650.jpg
    IMG_4650.jpg
    107.5 KB · Views: 19
  • IMG_4648.jpg
    IMG_4648.jpg
    113.9 KB · Views: 19
  • IMG_4581.jpg
    IMG_4581.jpg
    101.3 KB · Views: 19
Interior needs work.:D Good luck with the Caddy.

Thanks Bob.
Mrs T came out into the shop and was looking at the Caddy......:eek:
Mrs.T......"Why do all the cars you buy have floor rust."
Me..... "With my budget you are lucky they have wheels.".....:p
After I worked on the Dodge I turned my attention to old Ratty.
They don't make replacement rockers for this car. Regardless of what you may see. These are a terrible fit. And yes they need a good blasting.
They stick way out past the outer edge of the door.:eek:
They don't have the rear door bulge extensions, either.:eek::eek:
And as can be seen in the pics. Yes there is floor work to do.[;) [;) [;)
More slicing and dicing for Torchie.
Remember. The plan is to leave the outside just as it is. The only repair work will be to make things structuraly sound. Like the rockers and the floor.
Come up with a cheap interior for it and then see where we go from there.
Keep on keeping on.......
Torchie
 

Attachments

  • IMG_4677.jpg
    IMG_4677.jpg
    62.9 KB · Views: 8
  • IMG_4678.jpg
    IMG_4678.jpg
    79.9 KB · Views: 8
  • IMG_4679.jpg
    IMG_4679.jpg
    121.3 KB · Views: 9
  • IMG_4680.JPG
    IMG_4680.JPG
    80.2 KB · Views: 8
  • IMG_4684.jpg
    IMG_4684.jpg
    112.5 KB · Views: 9
  • IMG_4685.jpg
    IMG_4685.jpg
    93.4 KB · Views: 9
  • IMG_4686.jpg
    IMG_4686.jpg
    77.7 KB · Views: 8
My buddy bought a full set of seats off of marketplace for his wagon. Dirt cheap and they look good. Power and heated. They fit very good .

Keep in trucking. This is so cool!
 

Attachments

  • 123951.jpg
    123951.jpg
    112 KB · Views: 10
  • 123_1.jpg
    123_1.jpg
    112.4 KB · Views: 9

Latest posts

Back
Top