Old Iron
Well-known member
[P[P[P
My rusty/ratty 1948 Chevrolet truck
- Thread starter Flipper_1938
- Start date
Help Support Rat Rods Rule:
Flipper_1938
He recycles the right way
Nice. A Model A drag car probably shouldn't have drag radials. I'd do it though.
Ok, a drag car that gets driven to cruise nights. I'm thinking a highboy coupe, 32 frame rails and a full cage. Not 100% sure about rear suspension. Can't decide between modern drag race 4 link or P&J style ladder bars.
Flipper_1938
He recycles the right way
Flipper_1938
He recycles the right way
Ok , I've been playing with front wheels trying to figure out what I am going to build. I love the picture of that model a with the spindle mounts, but a 15 inch wheel looks ridiculous next to these 18x9.5 wheels. Also, I really think I need more rubber on the road for street driving.
I found two 16x5 I like. American Rebel sprints and Rocket Racing Solids. Not sure if one inch is enough to fix the proportion problem
If I go to 17's...I found a 17x6 I kinda like (not 100% sure I want try and polish them) and 17x7 that kinda has the vibe of 10 spokes (not sure anybody else will get what I'm going for).
Anybody have thoughts on having different style wheels on front and back?
I found two 16x5 I like. American Rebel sprints and Rocket Racing Solids. Not sure if one inch is enough to fix the proportion problem
If I go to 17's...I found a 17x6 I kinda like (not 100% sure I want try and polish them) and 17x7 that kinda has the vibe of 10 spokes (not sure anybody else will get what I'm going for).
Anybody have thoughts on having different style wheels on front and back?
Attachments
Torchie
Well-known member
Wasn't uncommon to have wires on the front and solid steel wheels in the back.
Torchie
Flipper_1938
He recycles the right way
Not sure what size wheels are on the blue car, but this is what it felt like with the shinny 18 next to my 15" toyota wheel. Too big to pull off the"Ohio Look" to me.
The red 32 is not what I am building but the wheel sizes feel a little more sane for street duty.
The red 32 is not what I am building but the wheel sizes feel a little more sane for street duty.
Attachments
Flipper_1938
He recycles the right way
I like the halibrand lookalikes too, I just don't like Billet Specialties prices. If I didn't get such a killer deal, I wouldn't have the rear ones.
Matching wheels for the front would be over $1000 without tires. Looking for something cheaper.
PANTHER!
man that has been bugging me since I saw your picture of the blue one. those wheels are called panthers, i remember those were some of the only cast wheels you could get with a super deep offset like that. my buddy had some on a dakota 4 dr yeeeears (almost decades) ago. I didnt care for them then either haha.
if you bought the first hali's for a steal then logically you would only have half price in the set if you bought the fronts for full price. [S I know your pain, have a set of stockton wheel reversed and super widened clip cap wheels, got em for $40, the fronts will cost me $400
man that has been bugging me since I saw your picture of the blue one. those wheels are called panthers, i remember those were some of the only cast wheels you could get with a super deep offset like that. my buddy had some on a dakota 4 dr yeeeears (almost decades) ago. I didnt care for them then either haha.
if you bought the first hali's for a steal then logically you would only have half price in the set if you bought the fronts for full price. [S I know your pain, have a set of stockton wheel reversed and super widened clip cap wheels, got em for $40, the fronts will cost me $400
Flipper_1938
He recycles the right way
I think I am going to order a pair of the 17 inch 10 spokes and try them with 205/55/17 tires.
They are going on the truck first. Hoping the drag radials help with the crazy fishtailing issues.
Edit: not a model A coupe, but I did find pics of a highboy with 17x7 and 18x10 wheels. It has a reasonable stance and should be able to turn or stop if needed.
The wheels are ordered...due middle of December..
These wheels weren't my first choice but $129 is way better than $519.
They are going on the truck first. Hoping the drag radials help with the crazy fishtailing issues.
Edit: not a model A coupe, but I did find pics of a highboy with 17x7 and 18x10 wheels. It has a reasonable stance and should be able to turn or stop if needed.
The wheels are ordered...due middle of December..
These wheels weren't my first choice but $129 is way better than $519.
Attachments
Last edited:
Flipper_1938
He recycles the right way
Flipper_1938
He recycles the right way
Old Stuff
Well-known member
Just finished reading through the build. That truck is freaking cool. Super to read/hear what's been going on with it. Full speed ahead! [cl
Flipper_1938
He recycles the right way
Now it's looking like the middle of May. .....I suck at buying my own Christmas presents.
Old Stuff
Well-known member
Nah, you don't suck at buying yourself Christmas presents. You're investing in the future! [cl
Surely there's something else you can spend money on. What are you getting yourself for Valentine's Day? [S
Surely there's something else you can spend money on. What are you getting yourself for Valentine's Day? [S
Flipper_1938
He recycles the right way
Old Iron
Well-known member
I bet ya had a great time too
earthman
Fascinated by rolling objects!
Good to see that you are still enjoying it Flip. How long have you had it now?
smallfoot
He's rockin' the "Nuttin Special"!
I like the smoothies over those spokes you were looking at! Good to see ya posting...
