28 Fast Four build

Rat Rods Rule

Help Support Rat Rods Rule:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
As usual I'm waiting for parts, but its parts for the Fargo, so that has given me time to work on the Dodge. My 59 Caddy tail lights came in and I have been busy doing the install on them, as follows.

The lights I purchased are pretty good quality other than the bulb mounts, and they sucked. I cut them out of the bases and made new plates out of 16 gauge with slots to install GM 1/4 turn bulb mounts. I fastened a 2x12 leveled to the back of the body to mount a jig for guiding the hole saw for the frenched holes, due to the curve of the body I could only use the hole saw for 2/3's of the hole then had to finish the cuts with a jig saw. I used 3.5"exhaust tubing for the light buckets. There will be a small access panel on each side in the interior for changing bulb or lenses.

A video https://youtu.be/fpxpeyXrHzY



attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php


attachment.php
 

Attachments

  • Resize of Tail lights 003.jpg
    Resize of Tail lights 003.jpg
    64.8 KB · Views: 62
  • Resize of Tail lights 004.jpg
    Resize of Tail lights 004.jpg
    74.4 KB · Views: 61
  • Resize of Tail lights 005.jpg
    Resize of Tail lights 005.jpg
    71.8 KB · Views: 63
  • Resize of Tail lights 006.jpg
    Resize of Tail lights 006.jpg
    74.3 KB · Views: 61
  • Resize of Tail lights 007.jpg
    Resize of Tail lights 007.jpg
    76.9 KB · Views: 61
  • Resize of Tail lights 009.jpg
    Resize of Tail lights 009.jpg
    95.8 KB · Views: 62
  • Resize of Tail lights 010.jpg
    Resize of Tail lights 010.jpg
    100.2 KB · Views: 61
  • Resize of Tail lights 011.jpg
    Resize of Tail lights 011.jpg
    77.3 KB · Views: 62
  • Resize of Tail lights 012.jpg
    Resize of Tail lights 012.jpg
    46.9 KB · Views: 63
  • Resize of Tail lights 002.jpg
    Resize of Tail lights 002.jpg
    69.4 KB · Views: 62
Last edited:
There done, it took 26 hours to complete the install [;)[;)[;) I've come to the conclusion hole saws over 2"are only meant for wood in a drill, even with my jig the lower hole on the drivers side went askew and required me to weld it back up and remark and cut with a jig saw. [S

attachment.php


attachment.php
 

Attachments

  • Resize of Tail Lights done 002.jpg
    Resize of Tail Lights done 002.jpg
    58.7 KB · Views: 50
  • Resize of Tail Lights done 003.jpg
    Resize of Tail Lights done 003.jpg
    50 KB · Views: 49
So after 5 weeks of sitting around with my bad knee, I'm able to move around a little with one crutch. Not sure how long it's going to be before surgery due to covid 19.
I deceided I had to do something, with my adjustable height work bench I was able to do most of this project on a chair with wheels. Stared out with a roll of 9 gauge black wire straightened is out spinning 16' lengths counter clockwise with a half inch drill. Made some 1/2"x 3/4" angle out of 18 gauge sheet stock for the frame that bolts into the shell.

attachment.php



attachment.php


I used a piece of scrap 1/4"plate to make a jig for drilling all the holes in the right spot.

attachment.php


The rods lower rods ready to weld.

attachment.php


http://ratrodsrule.com/forum/attachment.php?attachmentid=156268&d=1586110032

All welded in.

attachment.php


attachment.php


attachment.php
 

Attachments

  • Resize of Grill 001.jpg
    Resize of Grill 001.jpg
    76.4 KB · Views: 50
  • Resize of Grill 002.jpg
    Resize of Grill 002.jpg
    94.5 KB · Views: 49
  • Resize of Grill 003.jpg
    Resize of Grill 003.jpg
    76.5 KB · Views: 49
  • Resize of Grill 005.jpg
    Resize of Grill 005.jpg
    59.1 KB · Views: 49
  • Resize of Grill 006.jpg
    Resize of Grill 006.jpg
    95.2 KB · Views: 9
  • Resize of Grill 007.jpg
    Resize of Grill 007.jpg
    68.1 KB · Views: 49
  • Resize of Grill 009.jpg
    Resize of Grill 009.jpg
    72.9 KB · Views: 49
  • Resize of Grill 011.jpg
    Resize of Grill 011.jpg
    107.3 KB · Views: 49

Latest posts

Back
Top