Search results

I may have said this before but I do weld for a living and in the shops at work I use Miller and Lincoln. Both of these machines are absolute first class machines. In my shop at home I have a Linde 250 mig as well as a Thermal Arc Fabricator 210. The Linde is right up there in terms of quality...

The stuff I use is made by lennox. I think it was designed for bandsaw blades but it works good for all cutting. But yes it is in a tube like a grease tube only it is solid like wax.

there are special burrs for working with aluminum they are very course and do not load up, also very little chatter. I get them at the local industrial supply place. They also cut very well on steel with very little chatter

maybe a 36 or 37 ford

I wish that was all the snow we had! About 2' deep here.

Once again thank for all the info and help. The people on this site are always so helpful and patient with us newbies. Your help is much appreciated.

Thanks for the input. What kind of mopar boxes would I be looking for?

Any reason why an open wheel sprint car steering box wouldn't work in my truck build. They are set up for cowl steer already. The truck I am building will be approx. 500-800lbs heavier than a sprint car.

mine took a rosebud and a bfh

What adapters are needed and where do you get them. Also what calipers would you use with this (volare, aspen?). Sorry I am not trying to hijack this thread I just asked this question a while back and no one seemed to know the answer.

extractors that are used for pipe are short and big enough you might be able to drive one of these into it to screw it out.

Hey guys I have heard of people switching their ford I-beam axles over to disc brakes using junkyard parts. I hear that it is dodge discs and gm calipers. My question is has anyone done this swap? If anyone has what year axles does it work on? What discs and calipers are used? What bearings and...

Thanks for all the help guys. I guess I'll be buying some heavier ones for my wishbone.

Hey guys, I came across some good quality heim joints for cheap. The only problem is that they are 1/2". My question is are these strong enough to use for the ends of split wishbones, a panhard bar for the front end, or the steering arm (link between steering box and front axle). Did i get a...