Search results

bits i don't know if link will work but i have had really good luck with the 29 pc bit set from eso-spring on ebay if he does not list them send him a massage the usa made under $30 we are very ruff on bits in the shop and have gotten 4 sets sofar to refill our drill bit sets. he also sells a...

I to would love brono project I was trying to sell this one . Now I will get this going down the road and try selling it again

i keep chugging along steering is figured out steering column is also waiting for a dubble joint 3 stick shifter im running a 3 sp standers with overdrive, 1 lever 1 and reverse 1 is second and third last is overdrive right size tires and rims on frount make a bid diffrence

Life would be so muck easier with a sbc and automatic. I believe I now have the room I need to install the wilwood clutch and master cylinder assembly.

Works under way on the 32 rails there a full description being posted on fb in my personal group on just how it’s being done Go to River Oaks Gearheads But here is some hi lights

Well guess it’s not going to sell so back to work on the A Need to stretch it 3” to get clearance for the clutch fork. I have a set of 32 rails so guise I will redo the frame from the kick up forward. First had to cut the rear section of the 42 rails. Striped the A down and away we go

Hemi looks good in everything. This is one of mine 1963 F100

Don’t know why the sideways

I have been trying to sell this local for awhile I want to buy brouno 37 dodge. But for now I figured I would get some more done the body mounts are now done and the body bolted to the frame. Next is the radiator . I built the frame out of 2x4x3/16” tubing tapered in the frount . I have since...

Been some time since my last post not sure how to post here any more. But we will try anyway. Been working on this model a on and of the last 2 years got a .30 over 273 y-block was even able to find a set of forged piston Lot of little race parts went into it backed by a 3 speed standard with...

pistons 2 years ago summit racing still carried them I bought a set of .060 over for a 292 that still need to be built

if your in fort worth tx I have one you can use

where we are now I have been lurking around for a while and not posting so thought I would take a few minute share what in the shop getting knocked out 1st is a 50 Buick convertible got 500 EFI Cadillac engine next 2 are 53 ford and the my 59 5,0 EFI been staying busy There is a 29 model a 2dr...

I would kept an eye on ebay also some time nos parts and old stock show up hot heads will be the main source also TR WALTERS sells some parts all early hemis are expensive to build stock rebuild will run 800 to 2000 if you want to run it hard expect $5000 plus my 331 hemi has got around $7000 in...

yep should be .060 my big fingers do not work right some time I have seen them made out of everything from plastic totes to barrels to ply wood the one I got at Harbor freight 5 years ago does a good job just cant get much in it and kept having to drag out the pot and then clean up when done...

I have been shopping for a large cabinet for awhile and have decided to just build one Specs. have 2" square,1" square, 3"X3" angel iron, and 1"X3" angel and .60 aluminum sheets on hand Floor of cabinet will be 3'X8' Glove panel will be 16" tall X8' long and will have 2 sets of gloves Viewing...

speedway is still had to beat for the price never had a problem with them yet

I am running the F.A.S.T. system on my 53 ford with a 472 Cadillac and am very happy just bump the key and it fires up cold or hot.

I have a Hobart from Norther tools cost around $500 its a 110 volt unit so it can be used anywhere. I only use it for light work sheet metal to 10 ga steel for heaver work I have an ESAB multy master 260 it a mig, tig, stick requires 220 signal phase or 3 phase wires either way

this frame was pickup up from TheTruant along with a RPU starter kit not sure which one will be built first the SDN is (cant believe I am going to say this) to nice to turn in to a Rat Rod even though that is or was the plan at this point I have 2 piles of parts the 29 RPU and the 29 SDN a...