HURST neutral safety switch...
- Thread starter mashori
- Start date
Help Support Rat Rods Rule:
offroadrolls
Well-known member
Assuming the switch can handle the load, just interrupt the starters signal wire from the start wire at the ignition.
So: start wire at key to
Neutral safety switch in
and then from the neutral safety out to
the signal post on the starter solenoid.
So: start wire at key to
Neutral safety switch in
and then from the neutral safety out to
the signal post on the starter solenoid.
offroadrolls
Well-known member
Also it looks like you have 2 switches there
The other may be for the reverse lights?
The other may be for the reverse lights?
geonbugman
Banned
http://www.freeownersmanualpdf.net/...shift-lever-kit-installation-instructions.pdf
Instructions!!!!!!!! I use them for hand wipes!
Instructions!!!!!!!! I use them for hand wipes!
