Undead Sleds / Rat Rods Rule - Hot Rods, Rat Rods, Sleepers, Beaters & Bikes... since 2007!

Undead Sleds / Rat Rods Rule - Hot Rods, Rat Rods, Sleepers, Beaters & Bikes... since 2007! (http://ratrodsrule.com/forum/index.php)
-   Frame/Suspension/Brake... Talk & Q&A (http://ratrodsrule.com/forum/forumdisplay.php?f=23)
-   -   Quick 4-link question (http://ratrodsrule.com/forum/showthread.php?t=37492)

Az33 01-23-2019 08:21 AM

Quick 4-link question
 
Despite staring at it for countless hours and my best planning, my parallel 4-link bars ended up right about 5* downward angle to the front (1.5" overall). I don't have any adjustment other than moving the front brackets.
I've seen other builds with way more angle than this, but was under the impression they should be level. Is this going to be an issue?
Thanks guys

Old Iron 01-23-2019 09:57 AM

For street use, the angle of the lower bars are not as important as it would be if used for drag racing.
5 degrees up or down will work fine.

Az33 01-23-2019 05:54 PM

Quote:

Originally Posted by Old Iron (Post 507458)
For street use, the angle of the lower bars are not as important as it would be if used for drag racing.
5 degrees up or down will work fine.

Thank you sir 👍🏼


All times are GMT -5. The time now is 05:00 PM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Rat Rods Rule Inc.