37'-48' brakes and 42'-48' spindles

[mexabilly]

ok here is my question that's what i am running up front well speedway sells a seal and bearing kit but it says it is for mounting f-100 on your 37'-48' so i guess my question is would this seal kit work on my front end?

 

[rustybeercan]

I would call Speedway & ask them just to make sure. If that won't work, I'm sure they can point you in the right direction.

Beercan

 

[Blue Eyed Devil]

No, it won't work. The seals and bearings are available through your local NAPA, or you can order them from Midwest Early Ford in Springfield, Ohio.

They are great guys to deal with. Check them out here - http://www.midwestearlyford.com/

 

[mexabilly]

No, it won't work. The seals and bearings are available through your local NAPA, or you can order them from Midwest Early Ford in Springfield, Ohio.

They are great guys to deal with. Check them out here - http://www.midwestearlyford.com/

kool beans thanks for the heads up.