ninop69
Member
I've searched the threads and couldn't find any ideas on running another rad in the rear of the rod. I'm installing a mild sbc in my rod and with it being chopped and channelled, to get the grill shell height in proportion with the cowl, I'm afraid it dosen't leave much of a rad. The custom three core, large tube, is about 15x17 inches. I was thinking of squeezing another rad in the rear, maybe hanging from the frame over one of the axle tubes/four bars with a fan. What I need is an idea of how to "tee" it to the normal cooling system. I was thinking of running a hose/tubing/hose from the heater lines and plumb it through back to the heater core and then back to the engine. Does this sound do-able?