complicated 29

[cornfield customs]

i use a plasma cutter, i use a piece of angle iron set up as a guide, and it works perfect. very little grinding.mainly just to remove the cutting slag off the inside

 

[deerchooper]

nice build.

where and when is this show in cinci? i wouldnt mind coming down to check it out.

 

[cornfield customs]

the duke energy center, down town cincy, Jan 7-9 2011

 

[the reverend muddy grimes]

I love the work on this. I have to say thought that the first owner wanting the Jag 12 is much cooler than another sbc. Hate that you had to do it twice.[P

 

[Willowbilly3]

Great build thread and very nice work!

 

[Z.Z.Rat]

Same here. Haven't seen the build till this a.m.. Looks GREAT on the fab!

Will try to get down to Cincy to see you guys. Plan on hooking up with Mr. G if at all possible.

 

[cornfield customs]

more progress, got the drag link bar made, rear end tacked in for display, and rolling

 

[cornfield customs]

cut access holes in the frame to get to the nuts and cotter pins for the tie rod ends, on the wish bones. welded some tabs i drilled and tapped to hold a flush mount cover on, used some allen machine screws.

mounted the head lights the other day too

 

[Oldrodder43]

Outstanding work! Nice.

 

[cornfield customs]

got back on this car last week, got the 4 link and air ride set up in the rear. nothing to exciting lol but progress is progress.

then rolled it out side to sweep up a bit

 

[bamabm]

Cool build, like the chassis work, looks simple but isnt.

 

[cornfield customs]

got the body back on and mounts made for the air compressor and tank

 

[cycledog]

The puzzle is coming together quite nicely.

 

[nunattax]

cycledog clubs dont like individuals only people who like to hide in the group

 

[cornfield customs]

rolled it out side for some more pics

ride height

aired out

rear tire up above the bottom of the rear side window

 

[Sam_Fear]

Love the look of it slammed.

 

[cornfield customs]

made some good progress on it today, installed the passenger cowl panel i made, removed the wood track on the roof, made roof bows out of 1x1 that are arced like the originals, made a roof skin if he wants to go that route, i want to put 1000-1500 louvers in it so we will see, also made the hood. here are some pics

 

[Mr.Gussett]

Looks Good!

Nice work Mike!
I like the hood.I just made one for a 34 roadster.I didn't have a cutout in the middle,but the front is in a V shape! Pain in the Butt!
Looking good and low! Keep us updated![P

 

[cornfield customs]

finished up the rear of the roof structure, fabbed and installed the driver side lower cowl panel, then rolled it out side in between rain showers to get a good look of it with the hood

 

[Syndicate Chopz]

Im sitting here Admiring your Work!!
Great Job So Far!!!
what do u plan to Run for a Compressor? Shocks?