Ford Wheel Question

[Tim...Ok]

I'm running a 56 F100 axle in front and a truck 9" in back, both 5 x 5 1/2" pattern..I plan on using some approx 1954 IH hubcaps with the 3 diamonds on them, they have the clips on the OD to grip inside the lip on the rim..most ford wheels I've found are the opposite, they are made for a hubcap with clips towards the inside to grip the outside of the wheel..I have one wheel with the correct configuration but have no idea what it came off of, other than it fits my ford truck pattern..Any ideas what the wheels I need would have came on?

thanks,
Tim

 

[soltz]

Tim I sold a pair of wheels to a gentilman with an IH Scout with the 5 on 51/2 also maybe some older IH 1/2 trucks will work?
Hope it helps
Soltz [S

 

[phillip-r-s]

Check this out http://www.roadkillcustoms.com/hot-...p?LugCount=5&StudSpreadInch=5.5&StudSpreadMM=

 

[Willowbilly3]

My 58 and 60 pickups both have the inside bumps on the wheels and I think that lasted to about 64, but not clips really.

 

[sneakysnake]

Here is a link I found when doing a wide five search.
http://olskoolrodz.com/forum/showthread.php?t=24221

 

[Tim...Ok]

thanks for all the info..
Willowbilly3 that helped narrow it down..
SneakySnake, that link really helped with pics, looks like I need 49-64 wheels..

thanks everyone,
Tim