Todd
He's just one of them Rusty-Chainers!
My buddy Youngster showed me this tip. Another buddy gives me all the cans I can use.
Start with a gallon can from the body shop.
I have fence set up on the bandsaw table. Go slow when feeding it through.
The split
Trim the corners of the can down 3/4" for the hem.
I made these hand brakes, but you can also use a duck bill welding pliers.
Making the hem.
Start with a gallon can from the body shop.
I have fence set up on the bandsaw table. Go slow when feeding it through.
The split
Trim the corners of the can down 3/4" for the hem.
I made these hand brakes, but you can also use a duck bill welding pliers.
Making the hem.
Last edited: