pistolpete
Well-known member
Looking for some more experienced wisdom on my springs. Front is a Model A spring, it has some pitting on the faces of the leaves, just curious if others would think there is to much. I am questioning it, so it makes me wonder if I just buy new...
underside
top
Second issue, the T rear spring I originally had bought the main and 2nd leaf were cracked a 1/2" from the centre bolt. So I had picked up another main and second leaf. Just cleaned them up and rust treated them and assembled again. It appears there is a slight difference in the arch shape between the two. Not sure if this is a concern at all, it is a 3/16" gap or there abouts.
Just looking for some opinions.
underside
top
Second issue, the T rear spring I originally had bought the main and 2nd leaf were cracked a 1/2" from the centre bolt. So I had picked up another main and second leaf. Just cleaned them up and rust treated them and assembled again. It appears there is a slight difference in the arch shape between the two. Not sure if this is a concern at all, it is a 3/16" gap or there abouts.
Just looking for some opinions.