spindle measurements

[busman]

Can anyone tell me the distance center to center on these bolt holes? I am using 48-49 ford truck axle and am looking for a steering arm. I was wondering if all the bolt holes are the same on ford spindles. The only steering arms I have found are for the early ford spindles up to 47-48. Just wanted to be sure before I order. Thanks

 

[donsrods]

I have a set of the square back 46-48 on my T. I'll measure for you today when I go to the shop.

Don

 

[zzford]

Don't know off hand, but the easiest way is don't measure center to center, measure from the side of one hole to the same side of the other hole.

 

[DougnDog]

spindel hole

mine are f1's but I was told that they are the same as 42-48 the measurement is 3 5/16 . hopes this helps Doug

 

[donsrods]

I miked my 46-48 spindles today, and center to center is 3.25. It is the same between all four holes, both horizontally and vertically.

Don