I'm pretty much had made up my mind on what motor, transmission I wanted to use for my build. However after going to a few shows and trying to visualize the setup I'm starting to get cold feet so to say.
If you have a cummins 6bt swap in a fenderless setup please post pictures. I'm worried about the proptions being off with the engine and running a 48-ish era Ford F-1 cab and bed.
I'm thinking by not C-Channeling the body and the lowering the motor a bit so the rear clyinder would be hear the fire wall would work. The front axle will be in front of the ford cross member for air bags so the frame will lay down. I even went as far to think of adding a dullay setup to make the truck look more "bigger"
If you have a cummins 6bt swap in a fenderless setup please post pictures. I'm worried about the proptions being off with the engine and running a 48-ish era Ford F-1 cab and bed.
I'm thinking by not C-Channeling the body and the lowering the motor a bit so the rear clyinder would be hear the fire wall would work. The front axle will be in front of the ford cross member for air bags so the frame will lay down. I even went as far to think of adding a dullay setup to make the truck look more "bigger"