Wheel conversion

[Dvapteam]

Does any know a good source for changing a small bolt pattern to a large. We used a ferio front end assy but want to use older 19" wheels from a ford but not sure if we are stuck using something later model due to the bolt pattern of the rotor?

Thanks guys

 

[Gastrick]

You can probably get away with it by using an adapter from a source such as below:

http://www.ezaccessory.com/Wheel_Adapters_s/25.htm

Your Fiero uses a 5 on 100mm pattern I believe.

Early Ford wheel diameters are as follows:

1928-1929 21" diameter
1930-1931 19" diameter
1932 18" diameter
1933-1934 17" diameter
1935 16" diameter

Since you said you wanted a 19" wheel, the 31-31 Ford will do and has a 5 on 5.5 bolt circle. You will also most likely need an additional small adapter ring to support the hub of the wire wheel. If you already have the wheels, check for brake clearance before spending money on the adapters. By the way, you can get repop wheels in 19" from Coker.