Matt167

Their MiG 250 is the same basic machine by the specs. The manual for mine covers the MiG 250 as well. It is listed to take 10lb spools...

I figured I couldn’t loose at this price. If it works for 2.5 days it pays for rentals. Not that I’d ever rent a welder. $60 a day is...

After I deemed my Mig welder unrepairable by myself ( not good at soldering circuit boards ) I ordered this welder. It’s the Hitbox...

Ive considered spacers in case I need more width. I’m thinking I want a taller tire. Would running an LT range E tire on the rear work...

When I learned to stick weld by trial and error when I was 16. My dad told me to go out, soak some of his rods and turn up the welder...

My brother did once. He’s older than me so I knew to never try

I always keep my rods in a storage box. When I built the original frame I was using 7018AC and they got damp so I had to get more. I...

I used to play around with Japanese import cars. Getting them titled used to be a PIA. I used to go to 2-3 DMVs before I found one that...

I’m actually going to buy a toaster oven. Set for 200* and toast a few at a time and yes I’ll buy fresh rods a pound at a time.. I knew...

If I can catch air gas when it’s open, I can get whatever rod I want. I’ve seen the Forney online. Been curious. Lincoln may be...

In NY if you have a legible vin plate or number on a frame or engine block. You can use a couple forms to declare lost registration and...

My arc welder is a DC inverter welder. Although 99% of the arc welding I’ve done has been on a Lincoln tombstone AC box. The directions...

What welding rod should I use for a model a frame? I bought a box of 6011 1/8” and a box of 7014 3/32” from TSC to see what those 2...

My wife knew I was a car and boat guy going in. When I told her I wanted to re kindle a project that she had never seen, and buy a frame...

I know. Easier to find in NY and I’m running fenderless so It’ll be nice to have some wiggle room.