Recent content by Guilty

Update have the frame off the table now and installing the new front end setup.

Thanks for good comments, I was goin to clean up the areas that were welded. But I'm liking it more and more the way it is. Here's how the cab sits now. I cut the center of the roof out because it was damaged. I like how it looks with it cut out, thinking about building a frame for the opening...

Here's the front in place just need to weld on the bat wings. Goin to order my radius rods and front brakes later this week.

I know it's been awhile since I posted any updates. Been real busy with work and other projects. But here some updated pics of the build. Here's the motor I got for free along with a turbo 350 for free as well. Frame on my make shift frame table. Pulling the front in getting ready to...

Get in touch with RPM on here he can make you a front perch for a square x-member and 2" spring.

Here's how I did mine I had an old metal table. I took the table leveled it and then built the rails. Then I took the rails and squared them to the table and each other. Took some C-clamps and locked the rails in place. Then I cut some 2x4s and C-clamped them to the front and back to hold the...

I took a break for a bit but I got the center piece welded it in.

Well I was wondering if anyone knew what the height of the cab was orginally? Since I missed cut a little I'm trying to figure out exactly how much of a chop I've done on my 47 Ford cab. Thanks for the help guys.

Nope just welded the gaps up slowly building it from the inside outward. Going to add bracing to the inner parts of the cab once it's all put together.

Got more done its getting closer. Made relief cuts in the B pillar to get the jamb and cab lined up. Welded it up and grinding it down. Inside jamb done And the outside done just needs some finishing touches.

Here's some of the bracing that I will be added to the roof.

Well got the welds are grinded down today. Just a little more to do and I should be ready to start the bodywork.

Inner part of the pillar welded and grinded down. Center section of the front half of the roof in place. One more pic of the roof.

Here are some new pics been slow go. Relief cuts made and welded up. The welds grinded down need a little more work. Front pillar welded in Front pillar grinded down

Thanks YoungBlood Yea that's the pinion that you see. It's all there and he told me last night that he has an extra 3rd member that he is going to give to me for it as well. As soon as he can find it