billy
Motor mouth ratchet jaw!
"Recently "Machinist Workshop Magazine" did a test on penetrating oils using nuts and bolts that they `scientifically rusted' to a uniform degree by soaking in salt water. They then tested the break-out torque required to loosen the nuts. They treated the nuts with a variety of penetrants and measured the torque required to loosen them. This is what they came up with:
Nothing = 516 lbs
WD-40 = 238 lbs
PB Blaster = 214 lbs
Liquid Wrench = 127 lbs
Kano Kroil = 106 lbs
ATF/Acetone mix (50/50) = 50 lbs."
Nothing = 516 lbs
WD-40 = 238 lbs
PB Blaster = 214 lbs
Liquid Wrench = 127 lbs
Kano Kroil = 106 lbs
ATF/Acetone mix (50/50) = 50 lbs."