Great find, Can you run an HEI distributor? I had 3X2 manifold a few years ago there was not room for an HEI I ran an old point distributor with a electronic ignition conversion kit in so I didnt have points do deal with. They look great on a motor.
That intake is drilled for the 4-bolt base Rochester carbs...they take up more room than the physically smaller 97's or 94's...you'll have to run an old points-style distributor, (or something of the same size...HEI won't fit)...
i wouldn't worry too much about the dizzy clearance-there are alot of options on a "small distributor....pertronix, mallory unilite, and accel dual point just to name a few...
I used an Accel electronic distributor on a 3X2 setup with Rochester 2G's. The electronic distributor was the same size and used the same cap as the Accel dual point I replaced it with.
Nice score dude! My ol man and I ran a Mallary unilite hei dist behind our 3 deuce worked good. Try to stay away from points type ,esp a dual point dist, nothin but headache.
Nice score dude! My ol man and I ran a Mallary unilite hei dist behind our 3 deuce worked good. Try to stay away from points type ,esp a dual point dist, nothin but headache.
Nice score! I'm jealous, I want one. I'll tell you like a friend told me once. When you are riding down the road and all of a sudden you stop, you get out, open your hood and find your carb missing, don't worry about it. I got it.