Show me your tips...uh...exhaust tips!!!

[Burnin Fatties]

I just finished these and put them on my wifes CJ5. I went to muffller shop and got two pieces of free pipe (cut offs). made a paper template and traced it on pipe. I used three different sized hole-saws for the circles and an air-powered bayonet saw for the curved lines. Filed down the edges and sent it to the chrome shop. Be sure not to make your flames too narrow or they wont have enough meat to hold together. ...Now I will do my Harley pipes!

 

[Dirtyrat]

Those look damn cool, and you did it all by hand!

 

[Gastrick]

Nice work BF!

 

[YBeNormal]

Awesome tips man and great work.

Nice work BF!

Ok I have ask. How does that work?

 

[dmw56]

Ok I have ask. How does that work?

You pull the plug to uncork your exhaust.

 

[izzy]

those tips look just like mine but not chrome

 

[Gastrick]

You pull the plug to uncork your exhaust.

That's right. Turn out the wingnut and the cap falls off, uncorking the dumps. You can see the pipes leading to the rear in this photo.

 

[sneakysnake]

Mine.

 

[Flipper_1938]

I bet those points sure cut down on the pervs that try and hump your tail pipes!

 

[Tim...Ok]

I hate smacking my shin on a trailer hitch, but that only hurts a little..get too close on these and your gone for stitches..and maybe a tetanus shot nice work, they look cool

 

[izzy]

just about all my garage pants have a hole in the leg from snagging them on my pipes, but I am changing them up this winter, my wife and I went to a shoe about 25 miles away a few weeks ago and on the way home she had to stick toilet paper in her ear for the ride home.

 

[Shea Laking]

I just finished these and put them on my wifes CJ5. I went to muffller shop and got two pieces of free pipe (cut offs). made a paper template and traced it on pipe. I used three different sized hole-saws for the circles and an air-powered bayonet saw for the curved lines. Filed down the edges and sent it to the chrome shop. Be sure not to make your flames too narrow or they wont have enough meat to hold together. ...Now I will do my Harley pipes!

Those are some a$$-kickin' pipes, for sure! Really cool that you did that yourself, with all common DIY tools, too! Also, viva la chrome! I like shiny stuff!

Regards,
Shea

 

[Shea Laking]

just about all my garage pants have a hole in the leg from snagging them on my pipes, but I am changing them up this winter, my wife and I went to a shoe about 25 miles away a few weeks ago and on the way home she had to stick toilet paper in her ear for the ride home.

That's too funny! No baffles in there?

Regards,
Shea

 

[Rat'l Trap]

I hate smacking my shin on a trailer hitch, but that only hurts a little..get too close on these and your gone for stitches..and maybe a tetanus shot

I remember a case awhile back where someone had a broken tail light lens and someone walking brushed up against it and cut themself. The guy with the broken lens got a repair ticket. Had to show he fixed it or pay a fine. Kinda like the woman who dropped hot coffee in her lap then sued McD's for serving her hot coffee. Sheesh.

 

[izzy]

shea, yes there are augers in each one, I made them then welded a nut inside the auger and drilled and bolted them from the bottom, not much help, my wife said it is still to loud, but had johnny law in the garage a wk ago and started it up and he said it sounded good.

 

[Willowbilly3]

I put 12" augers with 2 full twists in each of my pipes and it barely quieted it sown at all. Now I'm building collector/silencer. Just enough to keep out of trouble if I'm careful.

 

[gunter32nd]

Hell yeah they are badass

 

[mopar4life]

these are on my truck

 

[Drewski]

Through the running board on my F100.

Drew