I ordered a WoodWard Fab model a couple months ago from Summit Racing for I think $129.95 plus a little shipping. I have to say other than a grease zirk being broken on it when I took it out of the box I am happy. I did the floor,and lower cowl/door reveal on the 46 ford truck I am building with it.There were a few issue's,like the adjusters that center the gears kinda suck but a little lock tight fixed that.It arrived about 3-4 days after I placed my order.
Compared to the Harbor Freight version it simply dominates,It is almost twice as thick and although it could still use some stiffening it has rolled the 18 ga. sheet with only a little bit of deflection(when you REALLY cinch down on the roller pressure adjuster) -BUT it has not been enough to affect the end product as long as you take your time when doing corners.
Like most others I would like to add an electric power source as it kinda sucks trying to do it all by yourself. Sadly,My wife is a far better "driver" as she calls it than myself.For those that are not familiar with my build I will include a few photo's that show the floor my wife and I did with the roller as well as the lower cowl/door (as it came out of the box) I would recommend this unit to any hobby/hot rodder.
Compared to the Harbor Freight version it simply dominates,It is almost twice as thick and although it could still use some stiffening it has rolled the 18 ga. sheet with only a little bit of deflection(when you REALLY cinch down on the roller pressure adjuster) -BUT it has not been enough to affect the end product as long as you take your time when doing corners.
Like most others I would like to add an electric power source as it kinda sucks trying to do it all by yourself. Sadly,My wife is a far better "driver" as she calls it than myself.For those that are not familiar with my build I will include a few photo's that show the floor my wife and I did with the roller as well as the lower cowl/door (as it came out of the box) I would recommend this unit to any hobby/hot rodder.