endicott_jb
Well-known member
Got some work done today. Not much but it's a step forward. I took the tank and checked to see how it'll fit and it'll fit perfectly, at least until I get a few of te body panels in. I took the torch to the bed sides From the truck and cut one of the wheel wells out and got it trimmed and welded into place. I think it looks good. Sorry for the bad pictures. Lights keep blowing out on me.
Gotta exchange my cylinders tomorrow but after that I should be able to cut out the other wheel well and portions of the bed floor for the rear. Until then, later.
![](https://proxy.imagearchive.com/720/7201d851e9d26f1eaa8fdf5667873488.jpg)
![](https://proxy.imagearchive.com/419/419943a5f1fbc1ff2c343cbd9522819c.jpg)
![](https://proxy.imagearchive.com/60c/60c9082f3a9cc9bec5f7e05c3865cb3f.jpg)
Gotta exchange my cylinders tomorrow but after that I should be able to cut out the other wheel well and portions of the bed floor for the rear. Until then, later.