lowering blocks

[frankr]

I want to lower the back end of my 34 Dodge by making 3" lowering blocks. Is 3 inches too much? Are there problems associated with these blocks?
FrankR
1934 Dodge 392 Hemi[S

 

[CR55]

I think they'll work as long as you have new U-bolts made that are a little longer so you'll be safe. A better way is to put the leafs under the rear....CR

 

[PA41]

You also need to check and be sure the pinion angle is still good, sometimes the blocks change it.

It needs to compliment the front angle like +2 -2...

PA41

 

[frankr]

Thanks for the info guys.
The leafs are already under the rear.
I will add the blocks and check the pinioin angle.
It sits way too high right now so, if I get the results I want, I will probably also install 3" lowered spindles to get her down in the front.
FrankR
1934 Dodge 392 Hemi