zzrodder
It ain't grey hair, it's chrome!
Lookin' good! [cl
The old seats were definitely a recipe for a sore neck...
The old seats were definitely a recipe for a sore neck...
Lookin' good! [cl
The old seats were definitely a recipe for a sore neck...
You might get more done on the truck if you kicked that squatter out of the cab...[cl
Looking good Torchie. Nice work all around.
Looks like the decision has been made for ya.
If you put a raised divider between the passengers say for coffee/soda cups then, it would resemble buckets.
My wife Judy, liked this pic so much she had me make it my desktop
Said it has all the fall colors. What a girl
If you mounted the frame on top of the OSB, it would lower the seat another 1" or so.
The seat cushion, you use, will keep the frame from messing with the back of your legs.
Use a shorter bolt here or cut these off, drill holes in the OSB to go around the nuts.
Use carriage bolts down through the perimeter of the frame a OSB for this part.
Torchie, I like your creativity. I was wondering about cushion height [S I'm keeping an eye on this, I'm thinking about taking the sprint down and channeling it, it's just not low enough (IMO) but I only have one inch of head room now, I'm thinking flat floor but the seat has to adjust so the short one can reach the pedals and she doesn't have to worry about head room.
Keep it up [cl
"ground of the square area under the bolt head so that they sit flat aganst the metal frame."
If you drill the size hole for the carriage bolt say 5/16" through the tubing then, on which ever side the shank will be, drill the next size up for the square shank 3/8", the nut will pull the square shank into the hole nicely so the head will sit flat and you won't have to grind the square shank round.
Another option would be to weld tabs to the bottom of the frame, cut the plywood to the inside of the frame dimensions, bolt the plywood to the tabs then, the seat bottom and the frame would be on the same level.
PS door inside done.
Outer side tomorrow.
Torchie.
4" chop cc. [ [cl
Torchie.
There iss no way it's chopped.... it looks factory fresh
Enter your email address to join: