ANNAMEL
Well-known member
Ok guys this is what i have. You know i am building a BIG BOGGIN truck at work and now i am working on the hydraulic lift to get you up in it. I have figured out the lifting arm that stay level during a full movement from ground to bottom of door.Not the problem. The problem is i am limited to space with the cylinder. Instead of 2 pivots mounts for the cylinder i know there is a way to put 3 pivots (one mounted to frame) (center mounted to cylinder)(other end mounted to lifting arm) with the hydraulic cylinder at the center pivot to decrease my cylinder stroke. If anyone has any experience with this let me know. Thanks a ton. Hope this isnt tooooo far out there Mod.