K Ken47int Well-known member Joined May 19, 2016 Messages 52 Feb 13, 2017 #1 Anyone have any idea if the studs for the rockers are pressed in or are they threaded in? Thanks
Old Iron Well-known member Joined May 19, 2011 Messages 15,290 Location Willard Mo. Feb 13, 2017 #2 If they are factory then they are pressed in
K Ken47int Well-known member Joined May 19, 2016 Messages 52 Feb 13, 2017 #3 Thanks old iron, I kinda figured that from the little bit I looked at them last night
Torch Extremely dangerous with a torch!!! Joined Jul 18, 2008 Messages 1,627 Feb 15, 2017 #4 you can install screw in studs if using high spring pressure with a radical cam but a good trick was to pin the studs to the casting by drilling through the head and stud and installing roll pins.
you can install screw in studs if using high spring pressure with a radical cam but a good trick was to pin the studs to the casting by drilling through the head and stud and installing roll pins.