52stude43
Well-known member
picked up a failed project a while back , had a mini truck frame with a drop center welded in , sat low , when you had a flat the frame would sit on the ground , nice if you have air-bags , but not with suspension and no motor installed yet , so I decided to change it up a bit , the drop section of the frame was built pretty nice and square with 2x3 tube so I will be saving that and re-doing the ends , the body started out as a 2 DR sedan that an old farmer turned into a pickup way back when , didn't do to bad a job with the building tin on the back , a buddy needs the tops of the doors for a bad chop on his coupe so I will build a roadster PU. out of it.