What exactly are you worried about with the rear suspension links?
The design looks decent, are you worried about the strength of the links/rode ends?
Sorry Dr, I guess I should of added that I set my ride height with a full load of fuel, so that the bars articulate through level as fuel burns off.At ride height you need to be closer to parallel to the ground, but you have some wiggle room depending on the use of the vehicle as well...
It looks to me that all you have to do is build you another cross member for the two top links.retty easy fix for that. Frame looks like it's welded good too.
Here's what I'd do with the lower links
Enter your email address to join: