hitman
Well-known member
- Joined
- Jun 4, 2007
- Messages
- 46
Hey all. I am getting started on my project and I want to build my own radius rods. Similar to a hair pin in shape; but I want to make it out of 3/8 plate and weld in my tubing to thread for the fittings.
I know the overall length (36") but I do not know how far apart are the two fittings in front for the clevis fittings.
My intention is to make a plywood buck to trace around with a plasma cutter.
The big picture is to elimainate the the perch and front transverse spring and run a coil over shock mounted off a beefed up radiator support to the home made radius rod "plates". Any dimensions would be greatly appreciated.
Brett
I know the overall length (36") but I do not know how far apart are the two fittings in front for the clevis fittings.
My intention is to make a plywood buck to trace around with a plasma cutter.
The big picture is to elimainate the the perch and front transverse spring and run a coil over shock mounted off a beefed up radiator support to the home made radius rod "plates". Any dimensions would be greatly appreciated.
Brett