Search results

thought some one might have some insight on this we have a 336 chev v-8. 1958 circa and the rear main is leaking this is a two piece rope seal. can it be changed without removing the crank? and without wrecking the front seal? I've heard that you may be able to loosen off the main bearing caps...

I am building a 350 sbc for my 55 pontiac I am starting with a 71 block with dished pistons I am using camel bump 64cc heads looking for suggestions as to what type of cam to put in it I want to use the stock tranny turbo 350 and don't want to use a high stall torque converter but still I want...

thanks rainman maybe I can turn a corner of my shop into a shrine and invite my friends over to sit in awe . "If you build it they will come"

I just bought a 327 chev, 1962-67 double bump 64 cc heads I took it apart and it has pop up pistons and a crane 286 fireball cam. I am soliciting opinions as to whether this will run on todays pump gas should I put it back together and try it or what do you think. These motors used to be the...

hi a couple of questions I have a 55 pontiac which has an inline six in it right now If I put a v 8 in do the motor mounts just turn 90 degrees and bolt up?? If that is the case how strong are the mounts when they are on the front of the motor?? I heard a rumor that they may be too week for...

I found some numbers under a certification sticker on the choke tower they are 80457-2 and the date code 0811 thanks again

howdy I have a holly 4 bbl bought at a swap meat the numbers are 6R 4585 B I have been looking on holly sites and cannot find this carb I wanted to know what it is and what it is from Thanks T-bucket

hi looking at getting a 78 pontiac grand prix for a doner car but I don't know much about a 305 big block. does it bolt in where a 350 small block would will it have a turbo 350 tranny why is it a big block any way?? any other info would be appreciated

I am looking at buying a 440 dodge motor to stick in a henry J the motor is presently in a motor home. Is there any difference between the 440 from a charger and the motor home model. It is hooked up to a automatic tranny. Also is there any way to confirm it is a 440 from the outside. eg...

help. I pulled a tranny c-6 out of my 72 f 100 with a 360 in it and I had another c-6 from a 351 to bolt in but they don't fit. couldn't measure bolt holes untill I had mine out what other engines have the same tranny bolt pattern as the 360??

thank you gentle men for your response I have a few months to digest it and look for goodies. Swap meet season is just around the corner so maybe some deals can be had while my boy is rebuilding the motor

hi again we just ripped a 350 out of a 1980 camero I have been seeing all types of hp numbers. they say that maybe this one has about 235. how come the early ones have almost 300 or more. What can I do to get my pony count up without breaking the bank. My boy is taking this one into the local...

there is no suspension right now I was thinking of some doner car to put leafs in the back maybe mid sized chev I need 52 inches between the wheels so the body doesn't rub. but I am totally wanting to listen to others ideas we are going rat with this one for now with the idea of making a...

hey I just got around to working on my 35 hudson terraplane It came with no steering and so I'm looking for ideas as to what to use for steering the frame rails are about 31 inches from side to side at the fire wall If I clip it what is a good doner?? is there anything that will bolt on?? what...

hey we just mounted our 55 international onto a 76 chev pickup frame now we want to lower it about 8 inches. any lowering tricks that you guys can pass on that don't include spending a whack of cash Thanks t-bucket

does any one have any info or experience putting dodge volare steering into an old frame?

pics are in the photo section finally got a friend to show me how to post them

1920 willys t-bucket 59 GMC 55 pontiac 55 international pickup 34 chev 1 ton

one way not to get upset over what they say is not to read their stuff me I want to be different just like everyone else

thats the stuff we dream about all winter myself I was out in the shop till midnight workin on the t-bucket too much snow here for a burn out