Old Iron
Well-known member
I had forgotten about this trick until, I remove the steering wheel in my 33.
Bolts for any type puller is usually coarse or fine thread. I take a coarse thread grade eight bolt and run a fine thread die over it and the result is, you can use these in either fine or coarse thread holes.
These are 5/16 for the steering wheel
Bolts for any type puller is usually coarse or fine thread. I take a coarse thread grade eight bolt and run a fine thread die over it and the result is, you can use these in either fine or coarse thread holes.
These are 5/16 for the steering wheel