Search results

What is a good donor to get a throttle cable about 24 inches and a pedal from? Any thoughts? I need to connect it to a Rochester 2 barrel.

I'm lookin for a complete bag kit for my 60 Belair. Any thoughts?

Here's a pic of the fuel gauge I plan on using and my question is,,,,,,does on wire go to a positive connection and the other go to the sending unit? If it does how do I know which is which on the gauge cause I don't want to connect the thing and have 12 volts going to the gas tank and a...

Would just like to get some ideas on master cylinders your running with now power disc on front and drum on rear.

Under my 37 Chevy truck I don't have alot of room and I installed Chevy 11 inch disc brakes up front and drums in the rear. I tried running it last year with just want the master cylinder but got to really lay on em to stop. I want to go to power but need a booster and cylinder that's small. I'm...

I put a stock 650 cfm on my 360 big block and when setting it up back fired quite a bit and took out the power valve. I took it apart and has a number 9 stamped on it. Should I replace it with another 9? The engine is stock with lake style headers. I've heard you should run them and check the...

On my 63 Chevy truck I have the old single well master cylinder and want to install a power brake dual well master cylinder. Does anyone know what is a direct bolt up to mine?

My new project was shipped Sunday and I can't wait to rip into it. Got a question though. I want to lower it as low as I can go without a c-notch. What are some of the suggestions you all have here. I don't want to heat the springs either. It's a 1963 Chevy C10 with the straight 6 cylinder, runs...

My steering link goes uphill from the steering box because the shocks are in the way, Is there any way I could put it on the lower part of the axle? Also on a left turn the tire hits the steering link. I posted this cause alot of you have great ideas and that's what I need.

Right now I'm running a tube front axle kit from Speedway with the 3 piont radius rods. I was told that the tube front axle with the 3 piont rods are unsafe. Is this true or are they okay? I didn't really run it on the road yet but soon will be ready.

Check it out,,,,,,,,,,,,,,New and used parts on facebook just started. Like it and you'll get all the info up front. Just search new and used parts.

For those of you that are from the central Pa. area,,,,the Ultimate Motorhead Show is coming up May 18, 19, and 20. It's moto is If you can drive it or ride it, bring it. 3 day show with a pig roast for pre registereds Thursday night. It's at the Bloomsburg fairgrounds. And more news,,,,,the...

If you have lake style headers, let's see them on your car.

I have a 350 Chevy automatic transmission and need a shifter. Right now it has a B n M rachet type shifter and looking foe a regular shifter, no rachet cause it's for the wife and has problems with it. What would be a good one out of the bone yard that is simple hookup and ease of operation?

I got the Blazer 16 inch space saver spare wheels and the baby moon wouldn't snap on because it didn't have the 3 little nubs to snap in place. So here's what I came up with and workg great. Only thing I need to do is add a pike nut instead of the regular 1/4 inch one.

Let's see how many remember this. Hoss, the man from Bonanza.

Speedway Motors has a lake style header kit that you weld up yourself for a BB Chevy and was going to order. Does anyone know if they come with the holes already drilled or do you have to drill your own?

When installing the front shocks, should I mock it up with all the weight on front axle or jack it up some to remove some of the weight?

If you look at the picture I have attached you can see the radius rod is not paralell with the frame. Is that a problem? Should I move my hole in the frame up to fix it? Anyone have any ideas why it's like that and what I should do to correct it?

Which do you like best and why? Which on is the strongest?