27 t riley eng.
- Thread starter rileyratrod
- Start date
Help Support Rat Rods Rule:
earthman
Fascinated by rolling objects!
High five for originality! We have Biggles on the board with a
Riley.More close up pix please.
Riley.More close up pix please.
Willowbilly3
A *real* tin magnet
Me thinks me like. I can't wait to see progress on this. What is bolted to the back? Some modified T5?
rileyratrod
Member
riley t
the eng trans rearend are 1948 riley . its a design from the 30's that ww 2 stoped the building of cars to fight the war. thay started building them in the late 40's after the war ended. only small#'s inported into usa. i have lots of parts and the eng is all new..
the eng trans rearend are 1948 riley . its a design from the 30's that ww 2 stoped the building of cars to fight the war. thay started building them in the late 40's after the war ended. only small#'s inported into usa. i have lots of parts and the eng is all new..
Willowbilly3
A *real* tin magnet
Oh, I was thinking a Riley T conversion. Still way cool.
rileyratrod
Member
some more process on rat
got the crossmembers cut and set in. allso the frame is at ride higth and the amount of pinch is set. going with rear coils/ladderbars. case tractor grill will fit nice. some more fabing and im ready to weld.
got the crossmembers cut and set in. allso the frame is at ride higth and the amount of pinch is set. going with rear coils/ladderbars. case tractor grill will fit nice. some more fabing and im ready to weld.
Attachments
Kool!
Jay,
Kool project but I had never heard of a Riley but I learn something new around here every day! Thanks for sharing!!!
BoB
Jay,
Kool project but I had never heard of a Riley but I learn something new around here every day! Thanks for sharing!!!
BoB
rileyratrod
Member
Blue Diamond Gezzer
Hi Riley RR,
Good to see another Riley Rodder on the forum, I'm I right in thinking it's RM running gear you have got there what happened to its pretty body.
Mine is a bit smaller it's a Elf (60's Mini) check it out on the forum here Biggles Ride
Hey Tripper, Not heard of Rileys...here was me thinking you were a man with a british bent
I will watch your build with interest RileyRR (as I do with many of the guys on here) if there in anything a guy on the right side of the pond can do just give me a shout.
Hi Riley RR,
Good to see another Riley Rodder on the forum, I'm I right in thinking it's RM running gear you have got there what happened to its pretty body.
Mine is a bit smaller it's a Elf (60's Mini) check it out on the forum here Biggles Ride
Hey Tripper, Not heard of Rileys...here was me thinking you were a man with a british bent
I will watch your build with interest RileyRR (as I do with many of the guys on here) if there in anything a guy on the right side
of the pond can do just give me a shout.EastCoastKrawler
Active member
Nice build! That riley grilleshell would look great in my opinion if you could make it work!
Good luck!
Good luck!
rileyratrod
Member
i tried the riley grill shell it looked small with no sides,ill post a pick and see what you think.
rileyratrod
Member
riley grill
tryed the riley grill looks funny with no sides on it. ill post a pick so you can see. i to like the grill but it just don't look right to me..
tryed the riley grill looks funny with no sides on it. ill post a pick so you can see. i to like the grill but it just don't look right to me..
rileyratrod
Member
bob w
Still crazy after all these years!
That Riley radiator shell is great! Use it if you can. The car has very interesting front suspension.
rileyratrod
Member
grill
im gona try to use the riley grill, im jumping ahead of myself working on the grill,but i like to see progress every day. im going to work on the back coils today...
im gona try to use the riley grill, im jumping ahead of myself working on the grill,but i like to see progress every day. im going to work on the back coils today...
rileyratrod
Member
earthman
Fascinated by rolling objects!
Fun build, the Riley shell will be unique while still being appropriate
50Ford
Has a blue oval on his cape!
Looks Great so far. I like the grill. Cant wait to see more
rileyratrod
Member
it takes time
takes a lot of time to set up a frame, cut,weld,grind,grind weld ,grind grind weld weld weld... well 2 rolls of wire later, my frame is now done !!!!! lots of set up and figuring,it took us allmost allday. im lucky to have a friend whos a millright [welder fab guy],i traded him some parts for his time. i can and do weld but he welds every day so he is very good.
takes a lot of time to set up a frame, cut,weld,grind,grind weld ,grind grind weld weld weld... well 2 rolls of wire later, my frame is now done !!!!! lots of set up and figuring,it took us allmost allday. im lucky to have a friend whos a millright [welder fab guy],i traded him some parts for his time. i can and do weld but he welds every day so he is very good.
Attachments
rileyratrod
Member
off the table soon?
i cant wait to get this off the table. its takes time to set it all up right. the frame [car] has ben on the welding table for 3 weeks. i am now shooting for a rolling car next week. wish me luck ill need it!!!!
i cant wait to get this off the table. its takes time to set it all up right. the frame [car] has ben on the welding table for 3 weeks. i am now shooting for a rolling car next week. wish me luck ill need it!!!!
