I lucked out and scored 3/4's of an early Dodge frame. This will save me a bunch of work trying to duplicate the dogleg in the frame under the cowl. This picture shows the repair on the bottom of the cowl - I have both bottoms repaired. The sheet metal dents on the passenger side are mostly hammered out, probably as good as they will get. Yesterday and today I welded the 2 halfs together. Then I cut out the lower rockers and replaced with new metal. That really stiffened the body up alot! I will get pics of that soon. An old hot rodder is helping me out with this. I have the fab skills I just need pointed in the proper direction since this my first build.