ive been doin some of the crappy stuff ive been putting off,the cab had been wrecked on the right rear corner and had alot of rough brazing rod all along the door opening and drip rail area,plus the cab corner was really thin and the opening had a large gap,i removed the drip rails and opened up a can of worms that was hiding under the right side.heated up all the brass and cleaned it all up,cut the upper door jamb out and straightened it out and lowered it down half inch were it belonged and put some new metal in the cab corner.
i really like the stock 39 headlight buckets,they mount on a cast ball style factory mount and i couldnt find any type of ball mounts inthe normal hotrod books so i got me two $5 1 7/8 chrome trailer balls from tractor supply company and center drilled them in my lathe and cut the ball off the stud,worked like a charm